Set Midi Channels with Sampletank
-
- Member
- Posts: 8
- Joined: Tue Dec 15, 2015 10:02 pm
Set Midi Channels with Sampletank
Hello
How do I setup the channels using IAA?
Sampletank allows up to 4 channels simultaneously..
Right now, I can only use midi from channel 1 into Auria.... on Cubasis app, you can set individual channels 1 through 4 and link it to different tracks within Auria.
Thanks
Rally
How do I setup the channels using IAA?
Sampletank allows up to 4 channels simultaneously..
Right now, I can only use midi from channel 1 into Auria.... on Cubasis app, you can set individual channels 1 through 4 and link it to different tracks within Auria.
Thanks
Rally
-
- Expert
- Posts: 39
- Joined: Wed Jul 25, 2012 11:30 pm
Re: Set Midi Channels with Sampletank
Not sure if this helps but chapter 19 in the Auria manual talks about MIDI channel selection.
-
- Expert
- Posts: 74
- Joined: Fri Oct 26, 2012 12:56 pm
Re: Set Midi Channels with Sampletank
My problem is the other way around.Can I select different midichannels for notes on the same miditrack in AP?
Any help is much appreciated!I want to use iSymphonic as IAA (which works very good) ,but I want certain midinotes to
have different midichannels so they drive different sounds in iSymphonic.
Any help is much appreciated!I want to use iSymphonic as IAA (which works very good) ,but I want certain midinotes to
have different midichannels so they drive different sounds in iSymphonic.
Re: Set Midi Channels with Sampletank
In the channel strip, if you click on the FX button, you'll get the screen popup for controlling midi in. You can either accept all channels, or select just one.
If you want to output not sure about that. Best check out the manual link above.
If you want to output not sure about that. Best check out the manual link above.
Re: Set Midi Channels with Sampletank
Not familiar with iSymphonic, buy someone (sorry for not crediting them, don't remember who) posted a very useful tip that could help you.
If you go into the piano roll, you can choose a note on the keyboard which will select all the instances of that note in the track. You could then cut and paste into a new track, which could be assigned a different MIDI channel. Repeat as needed.
Perhaps that will do what you want.
If you go into the piano roll, you can choose a note on the keyboard which will select all the instances of that note in the track. You could then cut and paste into a new track, which could be assigned a different MIDI channel. Repeat as needed.
Perhaps that will do what you want.
Re: Set Midi Channels with Sampletank
I created four midi tracks and one stereo. In the stereo I loaded SampleTank IAA via the FX slots. I set the midi tracks to output on channels 1-4 and configured 4 parts in Sampletank.
Re: Set Midi Channels with Sampletank
I can't find iSymphonic in the IAA lists.
Re: Set Midi Channels with Sampletank
A track in Auria can only have one MIDI channel at a time. You can change the channel using the channel selector, but there's no way to have a region which has notes with different channels on each note (if this is what you're asking?).
Rim
Rim
-
- Member
- Posts: 8
- Joined: Tue Dec 15, 2015 10:02 pm
Re: Set Midi Channels with Sampletank
Thank you for your answers
Yes, I was kinda expecting to have, let's say 4 midi tracks, each with a different channel number, playing back different sounds from Sampletank... Tho I do understand that only 1 audio stream can be recorded
Yes, I was kinda expecting to have, let's say 4 midi tracks, each with a different channel number, playing back different sounds from Sampletank... Tho I do understand that only 1 audio stream can be recorded
-
- Member
- Posts: 8
- Joined: Tue Dec 15, 2015 10:02 pm
Re: Set Midi Channels with Sampletank
Hi TedBPhx
Can you explain the "stereo" track part bit more... You mean stereo Audio track?
I got the 4 midi channels setup, but am lost on the stereo track.
Thanks
Can you explain the "stereo" track part bit more... You mean stereo Audio track?
I got the 4 midi channels setup, but am lost on the stereo track.
Thanks
Re: Set Midi Channels with Sampletank
There are two variants to do the setup.
Variant A
In Auria Pro
- Four midi tracks, each sets its midi channel (1-4) and its output to 'SampleTank' - Track 5 is an audio track with 'SampleTank Full(Instr)' as first FX slot insert In SampleTank
- All 4 parts need to be highlighted to receive midi
- For each part the channel has to be set Variant B
In Auria Pro
- Four midi tracks, each sets its midi channel (1-4) and its output to 'SampleTank'
- The forth midi track set its instrument to 'SampleTank Full(Instr)' In SampleTank
- All 4 parts need to be highlighted to receive midi
- For each part the channel has to be set
Variant A
In Auria Pro
- Four midi tracks, each sets its midi channel (1-4) and its output to 'SampleTank' - Track 5 is an audio track with 'SampleTank Full(Instr)' as first FX slot insert In SampleTank
- All 4 parts need to be highlighted to receive midi
- For each part the channel has to be set Variant B
In Auria Pro
- Four midi tracks, each sets its midi channel (1-4) and its output to 'SampleTank'
- The forth midi track set its instrument to 'SampleTank Full(Instr)' In SampleTank
- All 4 parts need to be highlighted to receive midi
- For each part the channel has to be set
Re: Set Midi Channels with Sampletank
iSYMPHONIC is called Crudebytes iSymphonic in the IAA list.
Re: Set Midi Channels with Sampletank
Other thing you could try is to use Midiflow. It sits between apps, and you could set it up to listen to one channel, then send particular notes out to particular channels in another app. Don't know if that helps or not, but it's a pretty useful little app.
Re: Set Midi Channels with Sampletank
You could try the following two track setup:Schimanski wrote:I want to use iSymphonic as IAA (which works very good) ,but I want certain midinotes to
have different midichannels so they drive different sounds in iSymphonic.
Normal notes midi track
- Use 'Crudebytes iSymphonic' as instrument or in the first FX insert
- Midi channel and midi output set to play normal notes in iSymphonic
- In AuriaPros midi editor, select the second midi track as reference to also see the 'special notes'
- Midi channel and midi output set to play special notes in iSymphonic
- In AuriaPros midi editor, select the first midi track as reference to also see the 'normal notes'
- At the beginning of a project, all notes are on the 'normal notes track'.
- Enter the midi editor in the normal track and start playing.
- If you decide to use a special note at some point, stop the playout.
- Position the playhead at the begin of that note (adjust the beat-grid accordingly)
- Select the note and press the 'Cut' button in the toolbar
- Change to 'special notes track' using the track select popup of the midi editor
- Press the 'Paste' button in the toolbar
- Change back to 'normal notes track' using the track select popup of the midi editor
- Place playhead somewhat before the note is played and continue auditioning
Hint 1: In AuriaPro, each midi track remembers its reference track - when switching tracks in the midi editor, the reference is also switched.
Hint 2: If you need two 'special notes' midi channels, add a third midi track with the main track as reference.
-
- Member
- Posts: 8
- Joined: Tue Dec 15, 2015 10:02 pm
Re: Set Midi Channels with Sampletank
Thank you -ki
Who is online
Users browsing this forum: No registered users and 4 guests