Ipad Pro + Behringer X32 not working

For topics specifically about audio interfaces (USB, MFi, Camera Connection Kit)

Moderators: Corey W, Rim

Post Reply
markowolf1
New Member
Posts: 4
Joined: Sun Jan 24, 2016 6:13 am

Ipad Pro + Behringer X32 not working

Post by markowolf1 » Thu Jan 28, 2016 3:31 pm

Hello,

its allready possible to connect my new Ipad Pro with Behringer X32 to record Track directly from mixer?
My "old" Lightning USB conector doesent work with new IPAD PRO.

Please for Sugestion, becouse i buy IPAD PRO for direct record from my Behringer.

Thanks!

Marko

Corey W
Expert
Posts: 257
Joined: Tue Sep 23, 2014 10:58 am

Re: Ipad Pro + Behringer X32 not working

Post by Corey W » Thu Jan 28, 2016 3:43 pm

Hi Marko,
With the X32, you need to make sure you first have the USB expansion card for the back i/o.
https://www.music-group.com/Categories/ ... SB/p/P0AZP

With the X-USB card installed, you will still need a USB powered hub and an Apple Camera Connection Kit to fully connect to your iPad Pro.

Once you have all the proper equipment, please post back if you need help with the internal routing settings of the X32.

-Corey

markowolf1
New Member
Posts: 4
Joined: Sun Jan 24, 2016 6:13 am

Re: Ipad Pro + Behringer X32 not working

Post by markowolf1 » Thu Jan 28, 2016 5:11 pm

Hello Corey,

thank you for a fast response.

So it is:

- my X-USB card in Behringer it is ok instaled (Same like before that works fine with IPAD 2 Mini!)
- i have a Card reader Hub (http://www.ebay.de/itm/Kamera-USB-HUB-A ... SwL7VWkmeh) that works also fine with my IPAD mini 2
- and i have same settings on Auria Pro on Ipad Pro

It is something that i must change?

Thank you!

Corey W
Expert
Posts: 257
Joined: Tue Sep 23, 2014 10:58 am

Re: Ipad Pro + Behringer X32 not working

Post by Corey W » Thu Jan 28, 2016 6:39 pm

Well I must admit that I have never seen a combo USB Hub and card reader with a direct Lightning connector cable output. Is this unit powered with an external power supply?

Have you tested this powered hub with the iPad Pro already?

We typically recommend a basic USB powered hub like this: http://www.amazon.com/D-Link-Hi-Speed-4 ... hub+d+link

They should all work with the iPad Pro as long as you also have one of these: http://www.amazon.com/Apple-Lightning-C ... ection+kit

-Corey

markowolf1
New Member
Posts: 4
Joined: Sun Jan 24, 2016 6:13 am

Re: Ipad Pro + Behringer X32 not working

Post by markowolf1 » Fri Jan 29, 2016 6:06 am

Ok,

Today i try with original lightning usb adapter. Maybe it is trouble in IOS version (Ipad mini 9.1 - Ipad Pro 9.2.1)!
We will see!

Thanks, Marko

markowolf1
New Member
Posts: 4
Joined: Sun Jan 24, 2016 6:13 am

Re: Ipad Pro + Behringer X32 not working

Post by markowolf1 » Sat Jan 30, 2016 11:17 am

Hello.

Now Works fine!

Problem was in NOT original Lightning USB adapter...in new version (9.2) will work just ORIGINAL!
Apple things!

Thanks for support!

Marko

Rokinbassplaya6969
New Member
Posts: 1
Joined: Tue Feb 28, 2017 11:42 am

Re: Ipad Pro + Behringer X32 not working

Post by Rokinbassplaya6969 » Tue Feb 28, 2017 12:03 pm

I have the same scenario going on. However, I don't have a USB hub. I was told the iconnectivity4 interface would work perfectly. The lighting chord works great n the iPad with the interface alone. However, I'm trying to connect it to the x32 using the host USB port on the interface, and I get nothing. Suggestions??

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest