Hi
I can't record any input with Auria. The inputs are routed correctly in both the Aria mixer and on my RME card. The signals are going in correctly (I can monitor them) but all I can record is multitrack silence. I gphave done all this befire and it worked fine. Is this an OS bug? Or...?
Ipad air2, OS 10.2.1 RME Fireface
Can't record?
Re: Can't record?
Check your input matrix, to make sure the routing is correct. You should be able to see the signal in the input matrix meters as well.
Rim
Rim
Re: Can't record?
the right inouts are selected in the matrix, but I don't see the signal? Not sure where that leaves me but the connection between the RME and matrix does seem to be the problem
Re: Can't record?
OK, is there a USB indicator at the top of Auria, or does it say "INT"?
Also, check that you've allowed inputs in your privacy settings in iPad settings (under Privacy / Microphone). That's one that gets a lot of users.
Rim
Also, check that you've allowed inputs in your privacy settings in iPad settings (under Privacy / Microphone). That's one that gets a lot of users.
Rim
Re: Can't record?
that's it! the mic setting was off. Many thanks.
and thanks to Apple for automatically charging my mic settings
and thanks to Apple for automatically charging my mic settings
Who is online
Users browsing this forum: No registered users and 145 guests