Mixing board

For topics specifically about audio interfaces (USB, MFi, Camera Connection Kit)

Moderators: Corey W, Rim

Post Reply
Renfield
Expert
Posts: 72
Joined: Sat Dec 20, 2014 10:27 am

Mixing board

Post by Renfield » Tue Dec 01, 2015 6:34 am

Is there any good mixing board to Auria that I can use when I mix? It would really help when I work with automation.

Ohmnoise
Expert
Posts: 29
Joined: Sun May 25, 2014 6:20 pm

Re: Mixing board

Post by Ohmnoise » Tue Dec 01, 2015 3:20 pm

Are you looking for a controller board with faders to ride your automation in Auria?
Otherwise a mixing board would be necessary if you go out on individual channels of Auria via Subgroups,Aux,Master into the board for its final mix.
An analogue mixing board with control faders starts from price-point with this http://www.allen-heath.com/ahproducts/zed-r16/

Good Luck!
iPad 3/16 GB - Alesis Dock - Auria 2.0 - ReTune - Audiobus - JamUp Pro - Alchemy Pro - DM1

Renfield
Expert
Posts: 72
Joined: Sat Dec 20, 2014 10:27 am

Re: Mixing board

Post by Renfield » Tue Dec 01, 2015 3:46 pm

Thanks for answer and link!

I like to move some faders instead of just touching the screen when I set the eq, compression, volume, pan etc. So maybe I don't need so many channels.

Ohmnoise
Expert
Posts: 29
Joined: Sun May 25, 2014 6:20 pm

Re: Mixing board

Post by Ohmnoise » Wed Dec 02, 2015 3:25 am

A controller like this http://global.novationmusic.com/launch/ ... control-xl# could be very helpful. You can map these knobs to control EQ, compressor ...

Good Luck
iPad 3/16 GB - Alesis Dock - Auria 2.0 - ReTune - Audiobus - JamUp Pro - Alchemy Pro - DM1

AuriaStudios
Expert
Posts: 111
Joined: Thu Jan 29, 2015 7:49 pm
Contact:

Re: Mixing board

Post by AuriaStudios » Wed Dec 02, 2015 2:50 pm

The faderport is one that works great an will do what you need and has a motorized fader
http://www.bhphotovideo.com/bnh/control ... &A=details

One of the members here posted a great video Anthony Alves

https://www.youtube.com/watch?v=zq710J9LdF0

Radside
Expert
Posts: 71
Joined: Sat Oct 31, 2015 2:07 pm

Re: Mixing board

Post by Radside » Wed Dec 02, 2015 3:12 pm

Hello everyone. This is my very first post on the Auria Forums although I've been lurking here for over a year. I was just watching a few Behringer videos on the X-Touch and the two that captured my attention were the videos on the X-Touch automation and 3 X-Touch units being cascading in Logic Pro. Since Auria supports Mackie Control, it stands to reason that the X-Touch units would also work in Auria. The links are below...not sure if they will work as this is my first post but if not, just go to YouTube and search for Behringer X-Touch. There are about 15 how to videos.

Cascading
https://www.youtube.com/watch?v=CbjXRZ2I_mk

Automation
https://www.youtube.com/watch?v=rSbgY5srBzM

Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests