Help! No signal after update
Help! No signal after update
Hi,
I'm working on a project, suddenly I could'nt get a signal to my armed track in the edit mode, neither did it record anything -just blank.
Good signal from my Itrack solo and it looks good in the input matrix, with the right input choosen. But no signal to armed track. I've done this a hundred times before, now its just not working all of a sudden. I've closed Auria several times, rebooted the Ipad, no Wifi or other apps in the back ground. This problem has occured after the latest update, along with some other more minor problems like a lot more stuttering and some other weird stuff.
Over all I'm a huge Auria fan and I'm impressed by the work you all put in. Best DAW in appstore
Auria and Ipad2 all updated
/ArmArnA
I'm working on a project, suddenly I could'nt get a signal to my armed track in the edit mode, neither did it record anything -just blank.
Good signal from my Itrack solo and it looks good in the input matrix, with the right input choosen. But no signal to armed track. I've done this a hundred times before, now its just not working all of a sudden. I've closed Auria several times, rebooted the Ipad, no Wifi or other apps in the back ground. This problem has occured after the latest update, along with some other more minor problems like a lot more stuttering and some other weird stuff.
Over all I'm a huge Auria fan and I'm impressed by the work you all put in. Best DAW in appstore
Auria and Ipad2 all updated
/ArmArnA
"Jazz is not dead it just smells funny"
Re: Help! No signal after update
... I might add that just minutes before this problem occured I tried to record some keyboard using IAA or/and Audiobus. Neither Nlog or Alchemy worked. I followed your guide in the manual. Using the IAA function Nlog would not record. The record button became a play button (?) resulting in an emty track in Auria. Alchemy just crashed. Then I tried the Audiobus way, but neither Nlog or Alchemy produced any sound. When I gave up and decided to do the part on guitar instead of keyboard thats when the problem occured. All good signal in input matrix, everything done as usual - but nothing. When I press record the metronome kicks in and the whole region on the armed track turns red, as allways. But when I press stop its a totally blank track
/ArmArnA
/ArmArnA
"Jazz is not dead it just smells funny"
Re: Help! No signal after update
Put Auria in Audiobus mode (it's an option in the settings). Some IAAs don't like the fact that Auria changes latency settings between play and record, and will silence the audio as a result. Putting Auria in Audiobus mode will keep the latency the same between play and record modes, and should solve this issue. Make sure to kill all apps including Auria after changing this setting.
Rim
Rim
Re: Help! No signal after update
Thanks Rim,
I will try this later today. So, this will also fix the problem I have with no guitar signal from miked amp in the Edit mode (as mentioned above)?
/ArmArnA
I will try this later today. So, this will also fix the problem I have with no guitar signal from miked amp in the Edit mode (as mentioned above)?
/ArmArnA
"Jazz is not dead it just smells funny"
Re: Help! No signal after update
Hi,
I still dont get a audio signal in edit mode. I opened another project and the signal where there, fine, but in the project where I failed to activate the IAA and Audiobus the input signal in edit mode is still not working. As I mentioned the signal is fine on my Itrack solo and in the Auria input matrix but its lost in edit mode. This happened directly after the mishaps with IAA and Audiobus. Cant record anything on this song until this problem is solved
/ArmArnA
I still dont get a audio signal in edit mode. I opened another project and the signal where there, fine, but in the project where I failed to activate the IAA and Audiobus the input signal in edit mode is still not working. As I mentioned the signal is fine on my Itrack solo and in the Auria input matrix but its lost in edit mode. This happened directly after the mishaps with IAA and Audiobus. Cant record anything on this song until this problem is solved
/ArmArnA
"Jazz is not dead it just smells funny"
Re: Help! No signal after update
I'm not sure I understand what you mean when you say the signal is lost in edit mode. Can you describe exactly what you're doing, and what happens in more detail?
Thanks,
Rim
Thanks,
Rim
Re: Help! No signal after update
Hi Rim,
I'm sorry if I am unclear. I want to record a guitar. I have a fine signal showing both on my Itrack solo and in the Auria input matrix, where I choose number one on the axis on lets say channel twelwe. All good. But when I look in either the edit or mixing window there is no signal showing on the fader meter on channel twelwe. And when I try to record the metronom starts and the channel turns red, as it always does. Pressing stop nothing is recorded, its blank. Not even a region with a flat line. The input signal is lost somewhere between the input matrix and the actual channel. Its only in this project it has happened. Like I said, I have done this procedur a hundred times before and this is the first time its happened and it happened right after my failing attempts trying to activate some sort of keyboard from Audiobus/IAA. As it is now I cant get a signal on any channel leaving this project unworkable. Has Audiobus or IAA reset or activated some weird setting causing this problem?
I hope you understand my problem and that there is a solution
Thanks for the great support
/ArmArnA
I'm sorry if I am unclear. I want to record a guitar. I have a fine signal showing both on my Itrack solo and in the Auria input matrix, where I choose number one on the axis on lets say channel twelwe. All good. But when I look in either the edit or mixing window there is no signal showing on the fader meter on channel twelwe. And when I try to record the metronom starts and the channel turns red, as it always does. Pressing stop nothing is recorded, its blank. Not even a region with a flat line. The input signal is lost somewhere between the input matrix and the actual channel. Its only in this project it has happened. Like I said, I have done this procedur a hundred times before and this is the first time its happened and it happened right after my failing attempts trying to activate some sort of keyboard from Audiobus/IAA. As it is now I cant get a signal on any channel leaving this project unworkable. Has Audiobus or IAA reset or activated some weird setting causing this problem?
I hope you understand my problem and that there is a solution
Thanks for the great support
/ArmArnA
"Jazz is not dead it just smells funny"
Re: Help! No signal after update
Do you have Auto Punch mode turned on? If it is, Auria won't start recording until it reaches your locators.
Rim
Rim
Re: Help! No signal after update
Rim, you're a solid rock. This was the problem all along. I've never used this funcion and must have pressed it by accident. You live and you learn. Sorry if I've wasted your time with this rookie mistake
Greatfull beyond words
/ARmArnA
Greatfull beyond words
/ARmArnA
"Jazz is not dead it just smells funny"
Who is online
Users browsing this forum: No registered users and 97 guests