free samples are availible here http://www.samplicity.com/download/
Say I use stereo microphone, so I doThis library contains True Stereo, or "stereo-to-stereo" impulse response set. The True Stereo sets use filenames that end with "L" and "R".
True stereo IR sets consist of two stereo IR files, one with reverb information for sound from the
left (L) input channel and one for sound from the right (R) input channel. Both files need to be
fed with a centered mono signal from respectively the L and R channel. Most current convolution
plugins have presets for True Stereo applications.
1) create 2 mono tracks, route them to L and R channel of mic, set track's pannings to L and R respectively
2) create 2 Convolution plugs on AUX, load "L" and "R" IRs into
3) send track_L to AUX1, track_R to AUX2
4) with latency 1024 it is even possible to monitor sound processed by convolution
problem is, as outlined in quote above, that Convoltion should recieve centered mono singnal, but in this setup it recieves panned one
as workaround it's always possible use insert Convolution but I got limited by MIX feature, sometimes just impossible to make desired sound while using insert