Bug regarding the automation
Bug regarding the automation
I just wasn't able to move the automation points up until i restarted Auria. Can't say exactly how i got there, but the last action before the bug was "undo move control point".
Another one, but a serious one, is the same since the Auria launch. When i loop a track and set the automation that it acts like a fade in, but i'm not letting it fade out properly, because the loop is just a temporary thing, the volume won't follow the control points accurately. After the loop restarts the sound on the first control point has for a short moment the same volume that it has when the loop ends, although it's set to zero. After that short moment it follows the control points again, until the loop starts again. Sorry for not being very eloquent here, but i hope i explained it well enough.
Another one, but a serious one, is the same since the Auria launch. When i loop a track and set the automation that it acts like a fade in, but i'm not letting it fade out properly, because the loop is just a temporary thing, the volume won't follow the control points accurately. After the loop restarts the sound on the first control point has for a short moment the same volume that it has when the loop ends, although it's set to zero. After that short moment it follows the control points again, until the loop starts again. Sorry for not being very eloquent here, but i hope i explained it well enough.
Re: Bug regarding the automation
Thanks for the info. I'll look into it. I think the automation issue while looping is caused by the fact that automation needs a little time to catch up to the loop, and so you'll see this lag if you set up a loop with automation.
Rim
Rim
Re: Bug regarding the automation
After freezing and defreezing a track several times the audio won't follow the automation points anymore. The volume level get's stuck wherever it get's started.
Re: Bug regarding the automation
OK, thanks. I'll look into that.
RIm
RIm
Re: Bug regarding the automation
Can I just ask a question on automation on this thread , didn't wanna start a new thread just to ask this
Is it possible to clear Automation on just one track to start again,or do you have to clear it all on all tracks
Is there a way round this
Cheers![Cool 8)](./images/smilies/icon_cool.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
Is it possible to clear Automation on just one track to start again,or do you have to clear it all on all tracks
Is there a way round this
Cheers
![Cool 8)](./images/smilies/icon_cool.gif)
Re: Bug regarding the automation
Currently the only way to clear automation on one track is to highlight all the points using the highlight tool, and then choose "Delete Automation Points" from the menu.
Rim
Rim
Re: Bug regarding the automation
Many Thanks
Re: Bug regarding the automation
Hi Rim,
Thank you for this great app.
Just bought it and cannot stop working with it
I found that accurate positioning of a control point is sometimes can be a bit tough.
For example, if I want to position a volume control point at 0db I struggle between close values above and below until I get to the zero.
Sometimes after releasing the finger the value moves a bit.
Is it possible to add an optional manual fine tuning? A knob or keyboard to enter values in the edit window?
Thank you for this great app.
Just bought it and cannot stop working with it
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
I found that accurate positioning of a control point is sometimes can be a bit tough.
For example, if I want to position a volume control point at 0db I struggle between close values above and below until I get to the zero.
Sometimes after releasing the finger the value moves a bit.
Is it possible to add an optional manual fine tuning? A knob or keyboard to enter values in the edit window?
Re: Bug regarding the automation
agreed,finetuning the automation lane is a bit of a pain.
iPad Air 2 - WiFI - 128GB - iOS 9.1 - Auria Pro 2.01 - Roland Duo Capture EX
Re: Bug regarding the automation
One thing I forgot, a possible automation-lock will be great.
An X or Y lock will be even better.
That way after setting a specific time you can change just the value or after finding the right value you can move the position inside the time-bar.
10x
An X or Y lock will be even better.
That way after setting a specific time you can change just the value or after finding the right value you can move the position inside the time-bar.
10x
Re: Bug regarding the automation
These are good suggestions.
Also, making the track you're working on full screen helps to fine tune automation points. Just pinch zoom vertically until the track you're interested in becomes full screen.
Rim
Also, making the track you're working on full screen helps to fine tune automation points. Just pinch zoom vertically until the track you're interested in becomes full screen.
Rim
Re: Bug regarding the automation
I became addicted to Auria
.
My songs finally sound WOW after doing the proper mix and giving each instrument its place of honor.
None possible without Auria.
Thanks a lot.
Shay
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
My songs finally sound WOW after doing the proper mix and giving each instrument its place of honor.
None possible without Auria.
Thanks a lot.
Shay
Re: Bug regarding the automation
On a completely different project i just lost all my automation points on one track. When i now want to access one of the previous used automation attributes Auria quits immediately.
Re: Bug regarding the automation
Another minor bug just appeared, too. The thing that follows the timeline while playing just broke out of the loop and kept wandering, while the loop was still intact and played correctly.
Re: Bug regarding the automation
Can you let me know how to duplicate these issues? Exactly what do you do in each case to get these to occur?
Thanks,
Rim
Thanks,
Rim
Who is online
Users browsing this forum: No registered users and 78 guests