The Working / Not working audio interfaces thread
-
- New Member
- Posts: 4
- Joined: Sat Oct 27, 2012 2:20 pm
Re: The Working / Not working audio interfaces thread
I have been reading for awhile but just now posting....I have seen it discussed and read that it was fixed with the last update but channels 1 & 2 are still backwards when using my Alesia's I/O dock.....I am also still getting a crash report every time I boot a new session........suggestions?
-
- New Member
- Posts: 4
- Joined: Sat Oct 27, 2012 2:20 pm
Re: The Working / Not working audio interfaces thread
I am guessing that means no.....
Re: The Working / Not working audio interfaces thread
I have some questions about the whole auria thing.presonus says that the audiobox 1818vsl can record up to 18 tracks simotaneously.can you use any kind of adat interface with the presonus.like a behringer 8 channel adat interface?i really want to record 16 tracks simotaneously but I need more knowledge on how this all works.i know with the camera connection kit and a powered USB hub you can hook up the audiobox.Now how do you go about hooking up an 8channel adat interface,and how does it all link together to run all 16 channels???? Please help me understand.this is all kinda new to me.
Re: The Working / Not working audio interfaces thread
@Tylejc - the ADA8000 hooks up to the 1818VSL by way of two fiber optic cables, one outbound and the other inbound carrying both audio and sync. Look for the Adat connectors on the back of the 1818VSL.
Hope this helps.
Hope this helps.
Re: The Working / Not working audio interfaces thread
Thanks @Scott O...this is new to me.i never used adat interfaces before.after perchasing auria I want to make my recording expand.
- Anthony Alves
- Expert
- Posts: 1444
- Joined: Sat Mar 10, 2012 9:52 am
Re: The Working / Not working audio interfaces thread
Yes it should as my Focusrite 2i2 works great and I believe the Solo is pretty much the same unit. Very good sound and a well built unit. Cheers.Kwaazi wrote: Hey everyone, just joined and thinking about getting the new Focusrite iTrack Solo .... will it be compatible?
~~_/)~~~
-
- New Member
- Posts: 2
- Joined: Thu Nov 08, 2012 6:55 am
Re: The Working / Not working audio interfaces thread
Hi Guys, Iam new to forum. I have a focusrite scarlett 2i4 and I think it needs a powered usb to work with Auria? Can anyone suggest a suitable powered usb? Many thanks!
-
- New Member
- Posts: 4
- Joined: Fri Oct 26, 2012 9:11 am
- Location: New York City
Re: The Working / Not working audio interfaces thread
Kwaazi:
Did youngest the iTrack Solo? If yes, any reviews?
Thanks,
BBQ
Did youngest the iTrack Solo? If yes, any reviews?
Thanks,
BBQ
Anthony Alves wrote:Yes it should as my Focusrite 2i2 works great and I believe the Solo is pretty much the same unit. Very good sound and a well built unit. Cheers.Kwaazi wrote: Hey everyone, just joined and thinking about getting the new Focusrite iTrack Solo .... will it be compatible?
~~_/)~~~
More BBQ! More Boogie!
-
- New Member
- Posts: 2
- Joined: Thu Nov 08, 2012 6:55 am
Re: The Working / Not working audio interfaces thread
PLEASE HELP ME! Focusrite 214 problems
have tried connecting my usb 2 powered hub, camera kit, Ipad, and Focusrite 214 and I'am still having problems.
When I connect everything up the usb indicator on the 2i4 flickers for a couple seconds, and so do the Gain indicators. After that my ipad freezes and I have to restart my ipad it to get it working. This happens wherther Auria is open or not.
I tried connecting my usb hub & 214 to my pc, & I downloaded usb drivers for my pc. No problems working with my pc. The 2i4 usb indicator was on solid, all the time, and the Gain incators worked fine.
Not sure what to try next or where the problem lies? Help!
Thanks
Scarlettman
have tried connecting my usb 2 powered hub, camera kit, Ipad, and Focusrite 214 and I'am still having problems.
When I connect everything up the usb indicator on the 2i4 flickers for a couple seconds, and so do the Gain indicators. After that my ipad freezes and I have to restart my ipad it to get it working. This happens wherther Auria is open or not.
I tried connecting my usb hub & 214 to my pc, & I downloaded usb drivers for my pc. No problems working with my pc. The 2i4 usb indicator was on solid, all the time, and the Gain incators worked fine.
Not sure what to try next or where the problem lies? Help!
Thanks
Scarlettman
Re: The Working / Not working audio interfaces thread
The Tascam iM2 stereo mic shows up as mono. If you create a stereo track, it records on the left channel only.
The mic works in stereo with MultiTrack DAW, Garageband, TwistedWave & the native video camera. It would be great if you could get it going in Auria.
The mic works in stereo with MultiTrack DAW, Garageband, TwistedWave & the native video camera. It would be great if you could get it going in Auria.
- Anthony Alves
- Expert
- Posts: 1444
- Joined: Sat Mar 10, 2012 9:52 am
Re: The Working / Not working audio interfaces thread
Just reporting that the Focusrite 2i2 is working fine with Auria on the NEW iPad 4th gen and the Lightning USB Camera Connector. Cheers
~~_/)~~~
~~_/)~~~
Re: The Working / Not working audio interfaces thread
The RME Babyface now works in CC mode
Re: The Working / Not working audio interfaces thread
The A.R.T. Voice Channel works great as a studio interface, giving two channels over USB with the CCK, one as the output and the other as any external FX via the insert. This is great, as I've been using it in my studio with everything else turned off so it's super quiet I.e. no computer fans or spinning hard drives, for recording SFX and Foley for a film I'm working on.
Thanks Auria,
Lukas
Thanks Auria,
Lukas
Re: The Working / Not working audio interfaces thread
Hi I have the following which seems to work fine with an unpowered usb hub via cck on new Ipad 4.
http://www.amazon.co.uk/External-Sound- ... 42&sr=8-16
You can preselect the required input in garageband as per to apogee one mentioined elsewhere so we need Rim to add the audio input selection as before in another post.
I'll be interested to see if the multi out is suported when we get the 1.04 update.
This unit seems to only support digital input at 48k but as cheap fully mobile solution it is not bad and allows digital input via my portable edirol mixer which has digital out
http://www.amazon.co.uk/External-Sound- ... 42&sr=8-16
You can preselect the required input in garageband as per to apogee one mentioined elsewhere so we need Rim to add the audio input selection as before in another post.
I'll be interested to see if the multi out is suported when we get the 1.04 update.
This unit seems to only support digital input at 48k but as cheap fully mobile solution it is not bad and allows digital input via my portable edirol mixer which has digital out
Re: The Working / Not working audio interfaces thread
I don't understand how to hook up the PreSonus 1818VSL, powered hub and camera connection kit to the iPad.
Is there a diagram somewhere?
Is there a diagram somewhere?
Who is online
Users browsing this forum: No registered users and 7 guests