The Working / Not working audio interfaces thread
Re: The Working / Not working audio interfaces thread
So any motu user here?
i think track 16 can be a great mobile interface, or the microbook, but not sure if will work for my ipad.
Sol on RME u only c analog inputs? no adat channels?
THX.
i think track 16 can be a great mobile interface, or the microbook, but not sure if will work for my ipad.
Sol on RME u only c analog inputs? no adat channels?
THX.
And the Firewire...
Hello. I own a FireWire Edirol FA-66. I plan to plug it with a ancient FW/Dock cable to test it.
But before, I'd like to ask if something dangerous for the iPad could occured.
If someone knows, that would be great
Many tanx ! Olivier.
But before, I'd like to ask if something dangerous for the iPad could occured.
If someone knows, that would be great
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: The Working / Not working audio interfaces thread
Hello. I saw usb/jack cable on sites. Would it work with a camera connection, or will some frequences miss ? Thanx ! ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
-
- Expert
- Posts: 26
- Joined: Wed Aug 01, 2012 12:36 pm
Re: The Working / Not working audio interfaces thread
May ancient (2001/2002) Edirol UA-5 audio interface works with the CCK and without the need for any hub (powered or otherwise). You have to flip the "Advanced" switch in the back to off so that it uses the basic drivers, but it still records and plays back at up to 24-bit/48kHz. It's also got coax and SPDIF in/out too which means it should interface nicely with my primary firewire audio interface for my PC.
Re: The Working / Not working audio interfaces thread
The 8i6 does still require a power source, yes?Muttlee23 wrote:[
Good news everyone! Focusite have already release some beta firmware for the scarlett 6i8 and 18i6 http://beta.focusrite.com/ thanks Rim!!!
Re: The Working / Not working audio interfaces thread
Yes, the 8i6 and 18i6 need their own power supply (but no hub is required).
Rim
Rim
-
- Expert
- Posts: 26
- Joined: Wed Aug 01, 2012 12:36 pm
Re: The Working / Not working audio interfaces thread
Here's another thing that I've found very useful: a dock extender cable. You plug the dock extender cable into the iPad and then plug the CCK into the other end of the cable. The one I got off Amazon actually squeeze-latches into the dock connector port, securing it way better than the CCK was ever secured. Also, since the connector on the cable is only 1/4 as long as the CCK is, it reduces strain on the connector port (I also use a Survivor case, so the cable connector fits better with that, too).
It's kind of cool: I can leave my USB cable plugged into the CCK and leave that plugged into the extender cable so I'm not constantly plugging and unplugging that.
It's kind of cool: I can leave my USB cable plugged into the CCK and leave that plugged into the extender cable so I'm not constantly plugging and unplugging that.
Re: The Working / Not working audio interfaces thread
Rim, I know the motu 828 is listed as DNW ,could you explain why? Also is it something motu might be able to fix in the future?
One other thing I have noticed. After I installed auria on my iPad, when I open garage band, open a song, hit play, I get one note and it stops play, hit play again, same thing again and again , until I change the view from tracks to instrument, then all good!
Love this app great work and thanks for all your help!
One other thing I have noticed. After I installed auria on my iPad, when I open garage band, open a song, hit play, I get one note and it stops play, hit play again, same thing again and again , until I change the view from tracks to instrument, then all good!
Love this app great work and thanks for all your help!
Re: The Working / Not working audio interfaces thread
We found that the multichannel interfaces by motu don't work with iPads, because they are not class compliant (they need special drivers). Unless motu switches to driverless, there's nothing that can be done...
Are you referring to running Auria in "Background Audio Mode" along with GarageBand?
Rim
Are you referring to running Auria in "Background Audio Mode" along with GarageBand?
Rim
Re: The Working / Not working audio interfaces thread
Did u did any test with iconnectmuse?
Re: The Working / Not working audio interfaces thread
Anyone tried a USB mixer such as the Xenyx series?
Re: The Working / Not working audio interfaces thread
Tried my Edirol M-16dx Mixer/multichannel recording interface NOT WORKING
Tried on a copy CCK
no hub (not got one) but the mixer has its own power anyway
iPad just says USB device not supported
shame would have been perfect form my needs
Dunno if edirol can do something with the firmware to it to make it work
Tried on a copy CCK
no hub (not got one) but the mixer has its own power anyway
iPad just says USB device not supported
shame would have been perfect form my needs
Dunno if edirol can do something with the firmware to it to make it work
-
- Expert
- Posts: 26
- Joined: Wed Aug 01, 2012 12:36 pm
Re: The Working / Not working audio interfaces thread
Don't hold your breath waiting for Roland to update any Edirol drivers. Edirol interfaces are pretty hit and miss in my experience. My UA-5 works but my GS-10 doesn't. If the mixer has an "advanced" driver switch make sure that is turned off. Also, if you have even an unpowered USB hub, try it. My Zoom H4n didn't work even with its own power until I used it with unpowered USB hub. Good luck!Jus wrote:Dunno if edirol can do something with the firmware to it to make it work
Re: The Working / Not working audio interfaces thread
Cheers for suggestions DrA
Appreciate that
Brought an official CCK and a USB hub today and tried loads of things today
And can Confirm. The Edirol M-16dx IS A NONE WORKER
Oh well
Onto the new interface search![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Brought an official CCK and a USB hub today and tried loads of things today
And can Confirm. The Edirol M-16dx IS A NONE WORKER
Oh well
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Onto the new interface search
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Re: The Working / Not working audio interfaces thread
RE: the charging while using the iPad issue, would this work???
http://www.amazon.com/White-Port-Charge ... B0060GW34Y
Gary
http://www.amazon.com/White-Port-Charge ... B0060GW34Y
Gary
Who is online
Users browsing this forum: No registered users and 6 guests