Setting up mixer with new camera connector

For topics specifically about audio interfaces (USB, MFi, Camera Connection Kit)

Moderators: Corey W, Rim

Post Reply
jrech
Expert
Posts: 43
Joined: Mon Nov 19, 2012 9:03 am

Setting up mixer with new camera connector

Post by jrech » Fri Jun 30, 2017 12:53 pm

I am running a behringer xr18. I just got a new iPad and the camera connector kit 3. When I connect the kit it recognizes it as USB input on auria. It changes the amount of inputs but no sound comes through on the meters. When I select an input it only says tracks. It doesn't give me a number to choose. The xr18 has 16 mic inputs. I was guessing I need to select which track I am using. The xr18 works in the x air app that is also on the iPad. I am not setting something up right in auria or there is going to be an update that I need to wait for. Any help would be greatly appreciated.
Jody Rech - iPad 4, Auria (Most of the plugins for it)

Corey W
Expert
Posts: 244
Joined: Tue Sep 23, 2014 10:58 am

Re: Setting up mixer with new camera connector

Post by Corey W » Sat Jul 01, 2017 8:48 am

What is the model number of the new iPad you just got (Settings app> General> About> Model)?

If you are selecting an input from your XR18 in Auria to record, make sure you record arm the track (press the record button on the top of an individual track) in order to select an external input from an interface.

If you are not hearing any sound from Auria, make sure you are monitoring through the XR18 interface using headphones or speakers connected. You can check and confirm your output settings/routing in the XAir app and the output matrix in Auria.

You can safely keep the XAir app running in the background with Auria.

jrech
Expert
Posts: 43
Joined: Mon Nov 19, 2012 9:03 am

Re: Setting up mixer with new camera connector

Post by jrech » Sat Jul 01, 2017 8:57 am

The model number is mp2d2ll/a. X air works and the signal goes into there. When I arm a track or try to select a track it does not come up in auria. The meters are not showing a signal coming in either. I will check the USB and all of the places you suggest. Thank you for you help. I really appreciate it.
Jody Rech - iPad 4, Auria (Most of the plugins for it)

jrech
Expert
Posts: 43
Joined: Mon Nov 19, 2012 9:03 am

Re: Setting up mixer with new camera connector

Post by jrech » Sun Jul 02, 2017 2:54 pm

I am still not getting any signal to auria from my behringer xr18. I have checked the sample rate, USB inputs, and armed the tracks. Can auria pro be used with the behringer xr18 or should I look for a different daw to record with? I like this application but I want to record with it. Any ideas or thoughts are greatly appreciated.
Jody Rech - iPad 4, Auria (Most of the plugins for it)

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests