Last used aux knob resets to 0 when scrolling mixer
Last used aux knob resets to 0 when scrolling mixer
I've stumbled on an odd behavior... If I set an aux knob and then swipe to scroll the mixer display to the right, then that knob will reset to 0. This is true for aux1 and aux2; whichever was the last one I adjusted gets reset. Rotating to go from landscape to portrait doesn't affect it, and I see this behavior regardless of screen orientation. This is also true for both sub channels and input channels.
Re: Last used aux knob resets to 0 when scrolling mixer
I don't have this problem here. Can you post a video showing how to make this happen? I tried scrolling the mixer both left and right several times and the AUX knobs I have set remain correct.
Rim
Rim
Re: Last used aux knob resets to 0 when scrolling mixer
Sure. It turns out it's not necessarily a reset to 0, but a reset to the last state, but it also doesn't happen 100% of the time, just most of the time. Attaching a .mov file was rejected, so I've put it on dropbox at,
https://dl.dropboxusercontent.com/u/248 ... b_bugS.mov
If there's another way you'd rather I get the clip to you, please let me know..
I used a combination of manually adjusting the knobs and double-tapping. Then I flick left and back right (and, on occasion, I get a slider in the process which perturbs the pattern).
Thanks!
https://dl.dropboxusercontent.com/u/248 ... b_bugS.mov
If there's another way you'd rather I get the clip to you, please let me know..
I used a combination of manually adjusting the knobs and double-tapping. Then I flick left and back right (and, on occasion, I get a slider in the process which perturbs the pattern).
Thanks!
Re: Last used aux knob resets to 0 when scrolling mixer
Yes - this is intended behavior in Auria. If you try scrolling across the screen and happen to touch a control when you begin your scroll, the control will move. Auria resets that control to its previous position automatically after you let go.
To prevent this, don't start your scroll on top of any controls.
Rim
To prevent this, don't start your scroll on top of any controls.
Rim
Re: Last used aux knob resets to 0 when scrolling mixer
I'm not sure we're actually describing the same thing. What I've found is repeatable is the following:
Create new empty project adding 2 channels.
double-tap on aux2 knob for channel 1 to set to 0 dB
place finger in open square below aux2 knob on sub 1, then move left or right a mm or two so there's some scrolling of the whole screen
The aux2 knob on channel 1 goes back to -∞ dB. Here, I'm scrolling without touching any control, just that empty square between the sub's aux2 knob and the slider.
Thanks!
Create new empty project adding 2 channels.
double-tap on aux2 knob for channel 1 to set to 0 dB
place finger in open square below aux2 knob on sub 1, then move left or right a mm or two so there's some scrolling of the whole screen
The aux2 knob on channel 1 goes back to -∞ dB. Here, I'm scrolling without touching any control, just that empty square between the sub's aux2 knob and the slider.
Thanks!
Re: Last used aux knob resets to 0 when scrolling mixer
Ok, thanks. That's the functionality I was describing, but it looks like it's not working correctly for that particular knob. Probably a bug.
Rim
Rim
Who is online
Users browsing this forum: No registered users and 216 guests