focusrite scarlet 2i2 problems

[spuds0828]

Hello everyone im currently using the focusrite scarlet 2i2 (which is on the inteface list) and the camera connection kit powered by a dynex usb3 hub that uses a usb 2 cable which after doing the research it supplies the exact power as the dyanex 7 mentioned in previous comments...heres my problem when i connect everything and fire up auria everything is good but as i start to work on a project everyonce in a while i get the trill of death when im using auria as a stand alone and also when i try to use audiobus! after a while it gets to the point where its hard to work on anything cause i have to keep reseting everything and after a few mins. it does it all over again...this is very frustrating...has anyone had this problem..or has any hints that would help????...thank you

[Rim]

This is definitely not normal. Can you describe in more detail what happens, and what you're doing right before it happens?

Rim

[spuds0828]

Sure rim,

Im in auria just recording or editing or actually just listening...and for some reason after a few mins..the trill of death begins and theres no signal from the interface to auria so i have to unplug the interface and plug it in again then it resets itself then its good for another few mins...plus i have everything ..my ipad3 in airplane mode and no apps running and it still does it...so not sure what it is

[Rim]

Can you describe a "trill of death". Is it like feedback? Also, does this only happen when the interface is plugged in to the iPad?

Rim

[spuds0828]

trill of death = like if the vocals are ...you and meeeeeeee....it will go you and and and and and and..which forces you to hit stop then it will fade out..then you hit play and then plkayback is choppy then forces you to hit stop again..then i unplug it and plug back in then it works for a bit then the same thing happens again...but yes only does it when the interface is plugged in..when its not the ipad works fine and i know the interface is good cause i use it with my brothers computer and hes running protools...and after research i know the hub works cause the amps is the same as the other byanex hub thats mention in the interface forum

[Rim]

It sounds very much like an incompatible hub to me. The focusrite interfaces actually don't need a hub. Can you try this without the hub at all, and see if the problem goes away?

Rim

[spuds0828]

according to the auria interface list it does but i did hear somewhere it was updated which i do have the latest version of auria..but yes i will try tonight and then reply..thank you for the help

[spuds0828]

Focusrite Scarlett 2i2 2 2 CCK No No the first no is works without powered hub and the second one is for charges i pad i just copy and pasted this from the suria support page

[Rim]

Thanks, we'll update it.

RIm

[spuds0828]

ok i will try tonight and reply then...thanks again

[Rim]

Actually, I think I may have been wrong on that. If the 2i2 doesn't have it's own power supply, it still needs a hub. We'll have to verify this, but I suspect it doesn't have it's own power supply.

Rim

[spuds0828]

that is correct it does not it only has the usb port in the back

[spuds0828]

I will get you the specs on it to give you a better idea

[spuds0828]

THESE ARE THE SPECS....

Product Features
4-port USB hub
Allows you to connect up to 4 USB 3.0 devices to your computer via a single USB 3.0 port.

5V, 3.6-amp/port output
Provides steady power or a quick charge to compatible devices.

Data transfer speeds up to 5 Gbps
Allow you to quickly upload and download photos, videos, music and other files.

Blue LED indicator
Lets you know when the hub is operational.


ITS A 3.0 INPUT BUT 4 EACH 2.0 OUTPUTS

3' USB A-to-micro USB B cable
Enables flexible placement.

Plug-and-play operation
Simplifies connection.

[Rim]

I suggest trying a different hub. It's impossible to say by just looking at the specs whether a hub will work with an iPad or not. Some hubs work well with iPad and some don't. Here's a thread where users are talking about the hubs that have worked fine for them:

http://auriaapp.com/forum/viewtopic.php?f=21&t=11320


Rim