reproducable BUG in Auria

[stmoeller60]

When setting up two channels to subgroup 1, placing a stereo delay in AUX1 FX, then change the AUX 1 level to the mid, then fading down the SUB down to infinty, there's still delay to hear, but it shouldnt. When moving the AUX1 level, the delay disappears.
Seems that the send level AUX 1 is pre-fader not postfader. ?

Cheers, Stephan Möller

[Rim]

Stephan,

Thanks. When you mention using the AUX1 send, is this the send knob on the Subgroup, or on the channel?

Thanks,
Rim

[stmoeller60]

the aux is on the subgroup channel

[Rim]

OK, thank you, I'll look at this.

Rim

[Rim]

OK, I think I know what might be happening in your case: please check if you have the AUX1 knob set in your channel also. In other words, on the track 1, for example, not the subgroup. There are two possible places to send to the aux bus.

Rim