Monitoring on a track that is in record

For general questions or discussion of Auria.

Moderators: Corey W, Rim

Post Reply
ronwasserman
New Member
Posts: 3
Joined: Wed Jul 18, 2012 2:46 pm

Monitoring on a track that is in record

Post by ronwasserman » Wed Jul 18, 2012 2:49 pm

I've only been using with iPad mic/headphone out so far as I learn the program.

When a track is in record, the audio existing on that track can't be heard? Or is this only because I'm not using a usb interface?

Thanks in advance for any answers.

Ron

Chris M
Expert
Posts: 96
Joined: Tue Oct 11, 2011 12:42 pm

Re: Monitoring on a track that is in record

Post by Chris M » Wed Jul 18, 2012 2:53 pm

Hello,

Audio that is on the track that is currently being recorded to will not play--however, if you set up auto-punch, it will play back audio on that track up until the moment at which recording begins (specified by the locator points). This way you can monitor a track up until the instant at which recording starts. It is no different when using a USB device.

Best,

Chris
WaveMachine Labs

ronwasserman
New Member
Posts: 3
Joined: Wed Jul 18, 2012 2:46 pm

Re: Monitoring on a track that is in record

Post by ronwasserman » Wed Jul 18, 2012 2:58 pm

Thank you Chris. Works perfectly.

Hopefully before too long we'll be able to just hit the record button where and when we want to 'punch' into a track. That would be a real time saver over setting up locator points.

You know.....most singers are very impatient. LOL!

Best,

Ron

instinctive
Expert
Posts: 156
Joined: Tue Jul 17, 2012 8:02 pm

Re: Monitoring on a track that is in record

Post by instinctive » Wed Jul 18, 2012 4:13 pm

Cheers Ron, remember the "I Will Love You" instinctive Remix back in... 2006?

Amazing to run into you here :) I've also converted to iOS for much of my production pipeline :)

And don't let Kathy read your comment on singers...

psandifer
New Member
Posts: 2
Joined: Mon Aug 06, 2012 10:20 pm

Re: Real time punch in?

Post by psandifer » Mon Jan 06, 2014 1:50 pm

Hello, I am a new user to Auria...love it!!! However, I do a massive about of
vocal overdubs where I sometime punch in on syllables, etc. I can't seem to
find a way to punch in real time. Does that not happen with Auria?

Rim
Site Admin
Posts: 8476
Joined: Fri Dec 23, 2005 11:08 pm

Re: Monitoring on a track that is in record

Post by Rim » Tue Jan 07, 2014 6:50 am

Auria doesn't have a real-time punch in, only auto punch-in. This is mainly due to the fact that we found there to be a significant lag from when you press a button on the screen to when the recording starts, so it wasn't very effective.

Rim

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests