How to midi learn/automate native Turnado

For general questions or discussion of Auria.

Moderators: Corey W, Rim

Post Reply
gburks
Member
Posts: 7
Joined: Mon Mar 03, 2014 4:42 pm

How to midi learn/automate native Turnado

Post by gburks » Sun Mar 20, 2016 9:47 pm

Hi,
I have Auria Pro and a Korg 1st gen nanoKontrol. I was hoping to be able to click midi learn in the native version of Turnado, wiggle a fader on the nanoKontrol, then record automation of my fader movements. However I can't get past the midi learn step. I long press, click learn, wiggle fader, nothing happens. I have tried setting the nanoKontrol midi settings to Notes In or Control In. Tried setting midi in to its channel, etc. nothing works.

mschenkel
Expert
Posts: 63
Joined: Wed Jan 27, 2016 6:42 am

Re: How to midi learn/automate native Turnado

Post by mschenkel » Mon Mar 21, 2016 4:24 am

I managed to do that routing the input from a midi track and can confirm that without this workaround it won't work(I used SideCar app for the midi cc but I think any CoreMidi input will do the same):
1.open Auria
2.add one Stereo track with Turnado on fx slot 1
3.add a midi track without any instrument loaded
4.set midi input to Nanokontrol(I think if it is set to all won't change)and out to "track1>Turnado"
5.don't know if this is essential but I did it anyway: put the automation mode to Read&Write
6.long-pressed on a Turnado knob and set to learn mode
7.turned a CC in SideCar
JOB DONE

Post Reply

Who is online

Users browsing this forum: No registered users and 133 guests