AURIA 2.01

For general questions or discussion of Auria.

Moderators: Corey W, Rim

User avatar
richardyot
Expert
Posts: 635
Joined: Tue Nov 19, 2013 4:45 am

Re: AURIA 2.01

Post by richardyot » Sat Dec 12, 2015 2:25 pm

Yes, it really is true, deleting that app is the best solution all round. Just use th e general pasteboard instead.

djeans
New Member
Posts: 4
Joined: Wed Dec 09, 2015 3:41 pm

Re: AURIA 2.01

Post by djeans » Sat Dec 12, 2015 8:47 pm

Rim wrote:Yes, that's exactly right. You can access this from either the output menu on each track, or from the output matrix.

Rim
Just tested today with my iPad Pro. I cannot access any direct outs. Still only able to route the sub groups to the inputs of my X32 interface.

tonydean
Expert
Posts: 46
Joined: Wed Nov 26, 2014 6:13 am

Re: AURIA 2.01

Post by tonydean » Sun Dec 13, 2015 1:00 am

Tried out 2.01 last night in my live show. No problems here so far. Thanks Rim! :D
iPad Air 2 128 gig wifi, iOS 11.4, Auria 2.0. Focusrite itrack dock. iFretless Bass, iRig Pro, Rode NT2-A recording mic, Takamine G-Series AC Gtr. Cole Clark Angel 2 Bunya/Blackwood acoustic.

Rim
Site Admin
Posts: 8476
Joined: Fri Dec 23, 2005 11:08 pm

Re: AURIA 2.01

Post by Rim » Sun Dec 13, 2015 7:24 am

@djeans,

Are you selecting one of the direct outputs in the Output menu on a track? The output menu is the menu directly above the AUX1 knob. The direct outputs are on the bottom of the list.

Note - this feature is only available on Auria Pro.

Rim

Denzkps
Expert
Posts: 144
Joined: Thu Sep 25, 2014 10:09 am

Re: AURIA 2.01

Post by Denzkps » Mon Dec 14, 2015 11:45 am

Hello Rim! I want to ask you about two things.
But perhaps I think you know about it. When I used pro-c2 (pro-g) in midi channel strip I had strange behavior, pro-c worked fine. Could You try it? And else, when freezing track and then return buffer size to maximum I have delay effect. Thank you!

Rim
Site Admin
Posts: 8476
Joined: Fri Dec 23, 2005 11:08 pm

Re: AURIA 2.01

Post by Rim » Mon Dec 14, 2015 12:24 pm

What kind of issues were you having with C2 and Q2? I already know about issues with the meters. FabFilter is fixing these meter problems.

Can you describe in more detail the issues you're having with the freezing delay? If you could give me a step by step list to follow, I would appreciate it. For example:

1. Create new project
2. Add an audio track
3. Freeze the audio track.

etc.

Thanks,
Rim

Denzkps
Expert
Posts: 144
Joined: Thu Sep 25, 2014 10:09 am

Re: AURIA 2.01

Post by Denzkps » Mon Dec 14, 2015 1:08 pm

Decide problem with pro-c2. I disabled midi in compressor and now works fine. Problem with small delay, I think that is bus make this effect. I will try more and send You project. I hear it when used drum (lyra) and bass or guitar audiotracks. Thank you!

djeans
New Member
Posts: 4
Joined: Wed Dec 09, 2015 3:41 pm

Re: AURIA 2.01

Post by djeans » Mon Dec 14, 2015 2:40 pm

Rim wrote:@djeans,

Are you selecting one of the direct outputs in the Output menu on a track? The output menu is the menu directly above the AUX1 knob. The direct outputs are on the bottom of the list.

Note - this feature is only available on Auria Pro.

Rim
That was it. Upgraded to a new iPad Pro, and the version of Auria that I had was not Pro. I'm pretty sure that I had bought the full version originally, but restore purchases didn't work, so I went ahead and repurchased the pro version. Works now.

Thanks.

Post Reply

Who is online

Users browsing this forum: No registered users and 158 guests