firewire to USB adapters...

For general questions or discussion of Auria.

Moderators: Corey W, Rim

Post Reply
scharamella
Expert
Posts: 31
Joined: Wed Jul 18, 2012 4:36 pm

firewire to USB adapters...

Post by scharamella » Wed May 01, 2013 7:32 pm

Do they work for us audio types ??

I'm wondering if I could use my RME FF800 ???

scharamella
Expert
Posts: 31
Joined: Wed Jul 18, 2012 4:36 pm

Re: firewire to USB adapters...

Post by scharamella » Wed May 01, 2013 8:19 pm

Took a punt & just shelled out a MASSIVE $1.90 for one.....

I'll report back :D

User avatar
Anthony Alves
Expert
Posts: 1444
Joined: Sat Mar 10, 2012 9:52 am

Re: firewire to USB adapters...

Post by Anthony Alves » Thu May 02, 2013 2:04 am

I don't think so as the unit would have to be core compliant meaning that the unit has to be able to be installed into the iPad without a driver so it is likely that a firewire unit would not have this connection capability. As well I am not sure that a Firewire unit turns into a USB unit because it has an adapter connected to it. Both methods use not only different hardware, but different software as well. USBs work on an ACK/NAK protocol, while FireWire uses a DMA transfer protocol. FireWire works at a constant (and fast) rate, while USB sends data in bursts. FireWire needs a processor on both sides of the data transfer.
Power consumption of both ports will be different. Therefore, one port will run at a lower power than the other, causing failed or incorrect use. You can try and no damage will occur if it doesn't work. Good luck and let us know your findings. cheers and hope this helped.

scharamella
Expert
Posts: 31
Joined: Wed Jul 18, 2012 4:36 pm

Re: firewire to USB adapters...

Post by scharamella » Thu May 02, 2013 2:56 am

I thought as much after I asked the question...
But yes I'll try it anyway, see what happens & I'll let you all know.

thanks Anthony

cheers
jim

Jus
Expert
Posts: 430
Joined: Sat Aug 04, 2012 10:34 am

Re: firewire to USB adapters...

Post by Jus » Thu May 02, 2013 4:56 am

I wouldn't if I were you
I tried it on my focusrite few yrs ago its fried a chip inside
Excuse the pun lol
£200 down the drain :(

User avatar
Anthony Alves
Expert
Posts: 1444
Joined: Sat Mar 10, 2012 9:52 am

Re: firewire to USB adapters...

Post by Anthony Alves » Thu May 02, 2013 3:37 pm

Jus wrote:I wouldn't if I were you
I tried it on my focusrite few yrs ago its fried a chip inside
Excuse the pun lol
£200 down the drain :(
Awe yes do be careful as this power difference could become dangerous as Jus suggests. I would choose not to now that we have this info. cheers.

scharamella
Expert
Posts: 31
Joined: Wed Jul 18, 2012 4:36 pm

Re: firewire to USB adapters...

Post by scharamella » Fri May 03, 2013 3:32 am

Jus wrote:I wouldn't if I were you
I tried it on my focusrite few yrs ago its fried a chip inside
Excuse the pun lol
£200 down the drain :(
OUCH.... thanks Jus, I WON'T be trying it out on my FF800 now....

hmmmmmmmmmmmm wonder what I'll do with the adapter now.... haa haa...... Bin it ???

BlackBox
Expert
Posts: 71
Joined: Thu Aug 09, 2012 6:34 pm

Re: firewire to USB adapters...

Post by BlackBox » Fri May 03, 2013 6:14 pm

They don't. At least for my alesis FireWire mixer into windows 7. It wasn't the cost that botherd me...it was waiting the 2 weeks to be disappointed that did waiting for the cable and adapter to come from china. They are a hoax from my experience

Post Reply

Who is online

Users browsing this forum: No registered users and 321 guests