Auria Discussion Board

I'm not sure we're actually describing the same thing. What I've found is repeatable is the following: Create new empty project adding 2 channels. double-tap on aux2 knob for channel 1 to set to 0 dB place finger in open square below aux2 knob on sub 1, then move left or right a mm or two so there's...

Sure. It turns out it's not necessarily a reset to 0, but a reset to the last state, but it also doesn't happen 100% of the time, just most of the time. Attaching a .mov file was rejected, so I've put it on dropbox at, https://dl.dropboxusercontent.com/u/24845683/auria_aux_knob_bugS.mov If there's a...

I've stumbled on an odd behavior... If I set an aux knob and then swipe to scroll the mixer display to the right, then that knob will reset to 0. This is true for aux1 and aux2; whichever was the last one I adjusted gets reset. Rotating to go from landscape to portrait doesn't affect it, and I see t...

Just a follow-up in case anybody is following this... The mic went back to Blue and was found to be bad. The replacement worked fine.

Same problem here with Auria Pro and the blue yeti. The yeti worked fine for a while, but now the gain is high (even with the knob on low). The input gain adjust in Auria does nothing (still clipping at -144 dB). I've tried running the yeti through a powered hub, but same problem. The mic is also ho...