Search found 1139 matches

by Anthony Alves
Sun May 20, 2018 12:31 pm
Forum: Audio Interfaces
Topic: Sound quality cheap vs expensive inter.
Replies: 4
Views: 836

Re: Sound quality cheap vs expensive inter.

There are plentyof tutorials on youtube on how to record acoustic guitar. There are many ways to do it using many different mic,placement,preamp,ect. My advice is to experiment. Try different mics and placement. New strings really help. It really depents on the sound your looking for. There is no on...
by Anthony Alves
Sat May 19, 2018 7:56 am
Forum: General Discussion
Topic: Overdubbing with Auria
Replies: 2
Views: 56

Re: Overdubbing with Auria

First make sure you have Record Monitor on in AuriaPro’s record settings. Set your latecy setting to a lower size like 128 or 64. Your X18 should have direct monitoring so you can monitor directly from your X18 mixer input and not the round trip from X18 to iPad and back to X118. Also don’t record w...
by Anthony Alves
Sat May 19, 2018 7:45 am
Forum: General Discussion
Topic: Tempo change, single stereo audio track.
Replies: 2
Views: 33

Re: Tempo change, single stereo audio track.

To do this with audio just use AuriaPro’s Timestretch . Works great. There is a youtube videos on this AuriaPro topic Cheers and good luck.
by Anthony Alves
Thu May 10, 2018 9:19 am
Forum: General Discussion
Topic: Automating sub-channels
Replies: 4
Views: 284

Re: Automating sub-channels

Thanks, Anthony, as always you are a big help. Didn’t see this info under automation so it must be under something else. This really helps a lot. Cheers to you. Wish I could go to a good pub right now, but I’m American. I assume you are British. Hi. Your right its not under automation. It under the...
by Anthony Alves
Wed May 09, 2018 3:32 pm
Forum: General Discussion
Topic: Automating sub-channels
Replies: 4
Views: 284

Re: Automating sub-channels

In the editor window tap EDIT, tap SHOW tap SHOW SUB/MASTER TRACKS. Now scroll to the bottom of the edit screen and you will now see the sub and master tracks and all automation is the same as usual. This is in the Auria Manual. Cheers.
by Anthony Alves
Sat May 05, 2018 11:09 am
Forum: User Submitted Songs
Topic: Active Auria Artists Demos/Masters
Replies: 353
Views: 270196

Re: Active Auria Artists Demos/Masters

How is everyone doing with their songs? Cheers
by Anthony Alves
Fri May 04, 2018 10:21 am
Forum: General Discussion
Topic: Song from itunes
Replies: 4
Views: 367

Re: Song from itunes

Various apps can access iTunes purchases. I use AudioStretch for example. I can open the song in AS, then export and open in Auria. I can also choose whether this is a wav or m4a. Yes I know this but My recommendation was a way to do it for free. You also forgot to leave a click by click instructio...
by Anthony Alves
Fri May 04, 2018 9:38 am
Forum: General Discussion
Topic: How to save as new project
Replies: 5
Views: 364

Re: How to save as new project

Yes thats what I said, snapshots are snapshots of a particular project. If you whant a different snapshot set that is outside the project then you will need to create a new project for each of your setups. So what your thinking is that you can be in a project, mess with it and then save it as a uniq...
by Anthony Alves
Thu May 03, 2018 6:20 pm
Forum: General Discussion
Topic: How to save as new project
Replies: 5
Views: 364

Re: How to save as new project

You don’t want to save a project but rather save a snapshot since your always in the same project, thats why saving the project overwrites the project. So Save snapshots whenever your in the same project. Don’t forget to name each snapshot with a unique name so that youdon’t write over a snapshot. D...
by Anthony Alves
Thu May 03, 2018 5:44 pm
Forum: General Discussion
Topic: Song from itunes
Replies: 4
Views: 367

Re: Song from itunes

You cannot do this from within your iPad for free. There are some apps that get around the iTunes agreement and your welcome to purchase them. For free you will need to use iTunes on your computer. The song must be on your desktop computer in iTunes but thats easy because any song on your iPad from ...
by Anthony Alves
Wed May 02, 2018 8:47 am
Forum: General Discussion
Topic: Basic Midi note editing....missing something?
Replies: 3
Views: 413

Re: Basic Midi note editing....missing something?

To move a note in the piano roll midi editor. Tap the note and hold, the note border will turn red, once it turns red you can move it to wherever you like. Use the snap function to land the note exactly where you want it. You cannot move the note unless it turns red. Cheers and good luck.
by Anthony Alves
Wed Apr 25, 2018 7:59 am
Forum: General Discussion
Topic: Automation
Replies: 2
Views: 398

Re: Automation

The best way to enter small timing for values like 1/8,1/16 note, just set your snap value to those beats like 1/16 and zoom into the track until you see the grid lines that represent that value. Also you should be vertically zoomed so that you are looking at only the track your automating. I can’t ...
by Anthony Alves
Sat Apr 21, 2018 11:45 am
Forum: General Discussion
Topic: Fugue machine: receiving input from wrong channels - why?
Replies: 4
Views: 429

Re: Fugue machine: receiving input from wrong channels - why?

Fuge machine is not AU3 but it is IAA compatible. More info is needed to understand your issue. Are you using FM as an IAA? Did you plug it into an audio track or a midi track? Are you using it as Core Midi, ie. running in the background? If you want to solve this rightaway then use Audiobus to acmp...
by Anthony Alves
Sat Apr 14, 2018 1:57 pm
Forum: General Discussion
Topic: Copy track and other questions
Replies: 2
Views: 529

Re: Copy track and other questions

First of all I want to thank all of you who have helped this newbie coming from Pro Tools over the last few months. It has been awesome! Sometimes I feel kind of stupid for asking simple questions about Auria which I can’t seem to figure out. And I do have some seemingly simple questions: 1) How ca...
by Anthony Alves
Sat Apr 14, 2018 1:38 pm
Forum: General Discussion
Topic: Reversing Polarity
Replies: 3
Views: 770

Re: Reversing Polarity

No problem. I use the polarity switch all the time and there really is no right or wrong polarity it is only what sounds good in the mix. Many mix engineers switch polarity just to achieve a different sound. If two tracks are conflicting like say overhead mic's than you will hear a phase shifting so...